3D Mapping Drone MP005 features:
1. Map more, more accurately: The MP005 can cover up to 50-70 sq. km in a single flight, and over smaller areas, flying at lower altitudes, it can acquire images with a Cannon 5DII of down to 1.5 cm/pixel.
2. No flying skills required: The MP005 is easy to launch with the auto launch system, It then flies, captures images & lands itself. (However you can reprogram its flight or land manually if required.)
3. Because safety matters: The MP005 uses Fiber Reinforced Plastics material, stable structure, minimizing its impact energy.
4. It’s all you need: The MP005 is supplied with two sturdy carry case and two software packages: Ground station (flight planning and control) & Hawkvine UAV 3D Mapping (professional photogrammetry)
The MP005 Mapping system solution
1. Plan your flight
Hawkvine UAV ground station software makes it easy to plan and simulate your mapping mission.
Plan: Import your preferred base map and define the area you want to cover. Then specify your required ground resolution, with a maximum GSD of 1.5 cm, and image overlap.
Ground station automatically generates a full flight plan, calculating the MP005 required altitude and displaying its projected trajectory.
Flying over uneven terrain? Use ground station’s 3D mission planning feature to take elevation data into account when setting the altitude of waypoints and the resulting flight lines – improving ground resolution and increasing safety.
Simulate: To ensure your mission’s success, run a virtual flight that simulates wind strength and direction. Then make any flight plan updates required and prepare to launch.
Launch: To launch the MP005, auto to launch form launching cradle by auto system.
The artificial intelligence inside the MP005 autopilot continuously analyses data provided by the Inertial Measurement Unit and onboard GPS to control every aspect of its flight.
Monitor: Using MP005 ground station software you can view the MP005 flight parameters, battery level and image acquisition progress in real time.
Control: Made a mistake with your planning? Reprogram your drone’s flight plan and landing point mid-flight.
Process: Use the MP005 supplied Hawkvine UAV Mapping software to easily process your flight’s photos.
In just a few clicks you can transform this imagery into geo-referenced 2D orthomosaics, 3D point clouds, triangle models and Digital Elevation Models (DEMs).
Trust: With the MP005 GSD of down to 1.5 cm, relative orthomosaic/3D model accuracy of 1-3x GSD, and absolute horizontal/vertical accuracy of down to 3/5 cm, you can have full confidence in the accuracy of the outputs you produce.
4. Your results
Once you have created your orthomosaic and 3D model, it’s time to put this data to work – for example by measuring distances, taking cross-sections, extracting volume data, or exporting to third-party software to add GIS data or create custom maps.
|Weight (inc. supplied camera):||9.0 kg|
|Material||Fiber Reinforced Plastics|
|Camera (supplied)||Cannon 5DII|
|Cameras (optional)||S110 RGB, thermo MAP|
|Carry case dimensions||160 x 200 x 160 mm|
|Parallel flight speed||16-20m/s|
|Max Takeoff Weigh||2kg|
|Landing Mode||Fixed Point Parachute Landing|
|Take off Mode||Catapult-assisted takeoff|
|Maximum flight time||5 hours|
|Wind resistance||Up to 45 km/h (12m/s or 28 mph)|
|Ground Sampling Distance (GSD)||Down to 1.5 cm (0.6 in) per pixel|
|Relative orthomosaic/3D model accuracy||1-3x GSD|
|Absolute horizontal/vertical accuracy (w/GCPs)||Down to 3 cm (1.2 in) / 5 cm (2 in)|
|Absolute horizontal/vertical accuracy (no GCPs)||1-5 m (3.3-16.4 ft)|
|Multi-drone operation||Yes (inc. mid-air collision avoidance)|
|Automatic 3D flight planning||Support|
|Linear landing accuracy||5 m (16.4 ft)|